Sparco

CMS Sparco Pro-Am Racer Suit/Shoes/Gloves Package Get the CMS Performance Racing Backpack free with this expertly curated Sparco safety apparel package! Package Price: $1477.00 in cart RACING HELMET (PICTURED) NOT INCLUDED Comprised of the Sparco's premium Eagle LT fire suit, Skid racing shoes, Arrow racing gloves, and CMS Performance Racing Backpack to help keep it all together. This package is designed for the serious racer who demands very high performance, lightweight comfort, and advanced safety features. The CMS Performance Racing Backpack makes it easy to tote your helmet and other essential gear to and from the paddock! (Helmet not included.) SPARCO EAGLE LT FIRE SUIT The Eagle LT is a limited edition suit available only for the US market. The Eagle LT features an all-new design in two colorways. This is a limited edition suit, only available for 2021 (while supplies last). The Eagle LT is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LT is FIA approved. Thanks to HOCOTEX®, the Eagle LT is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LT ultimate flexibility and comfort. The Eagle LT uses at new stretch material called Eagle fabric. This Eagle Fabric is lighter, more breathable and abrasion resistant than the traditional stretch material. Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LT has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance. SPARCO SKID SHOES The Skid driving shoe is a lightweight, unique design that has genuine ultra-soft leather upper with an offset closure system without a traditional shoe tongue. This design feature moves the potential pressure point of traditional laces from the top of your foot to the side which gives unparalleled comfort. The Skid also features a stretch rear collar for flexibility. It has a comfortable cushioned inner sole and an all-new slim rubber sole that is anti-slip, anti-static, and oil and fuel resistant. All-new anti-static pure rubber outer sole features a special texture for better pedal grip. The Skid is SFI and FIA approved. SPARCO ARROW GLOVES The Sparco Arrow racing glove provides incredible grip and superior comfort. The palm is printed with high-grip HTX, a Sparco patented material that increases grip, comfort and dexterity. HTX is strategically placed for maximum steering feel and performance. Another Sparco-exclusive feature is Touch-S technology, a Touch Sensitive index finger and thumb. Sparco's patented fire resistant touch sensitive material allows you to use your touch screen data acquisition electronics or phone lap timer apps without taking off your gloves. The Arrow is ultra-lightweight with pre-curved fingers, external stitching and a unique inner thumb seam that gives unparalleled comfort on long stints. The Sparco Arrow is both FIA and SFI approved.  

CMS Racing Seat Mounting Hardware Kit Complete Mounting Kit Includes: Four (4) 8x1.25 25mm Bolts Four (4) 8x1.25 20mm Bolts Four (4) 8x1.25 Locking Nuts Eight (8) Washers (Sparco Part Numbers 50001 and 50002, everything you need in one place.)

Sparco 2 Inch Alcantara Harness Pads Special memory foam harness shoulder pads covered in Alcantara suede with embroidered Sparco logo. FEATURES: Memory foam for amazing comfort. Alcantara stays in place, wears well. For use with 2-inch racing harnesses. Includes two harness pads per package. 

Sparco 4 Point Racing Harness (3" Steel) Strap In and Level Up Your Ride with the Sparco 4 Point Racing Harness! The Sparco 4 Point Racing Harness is here to redefine your driving experience, turning every ride into a secure, race-ready adventure. And no, we're not just pulling your leg... or should we say, your lap belt?Why the Sparco Harness is the Co-Pilot You Didn't Know You Needed:Unity in Safety: Designed to work in perfect harmony with Sparco's competition seats, this harness doesn't just keep you in place; it becomes one with your racing setup. It's like finding the peanut butter to your jelly.Quality that Speaks Volumes: Crafted from top-notch fabric and boasting durable fasteners, this harness ensures that once you're strapped in, you're in for a secure and comfy ride. No more wiggling around trying to find that sweet spot!A Perfect Fit: With 2-inch lap and 3-inch shoulder straps, this 4-point masterpiece offers a snug embrace. And thanks to the aircraft-quality quick-release buckle with integrated anti-submarine belts, getting in and out is a breeze—no advanced engineering degree required.Smooth Operator: The lightweight steel adjusters are like butter, making tensioning smooth and clamping just perfect. Because who has time for complicated adjustments when the track is calling?Snap to It: Each belt comes with snap-on fixings, making installation a snap (pun intended). And since they're FIA approved, you can hit the track with confidence, knowing you're as safe as can be.Tech Specs to Impress:Lap of Luxury: 2" lap belts for that just-right fit.Shoulder the Load: 3" shoulder straps to keep you snug without the hug-too-tight feel.Pull for Power: Pull-up lap belts for on-the-fly adjustments.Smooth Moves: Lightweight steel adjusters for that seamless tensioning.Snap Happy: Snap-in Kit Mounting included because who doesn't love convenience?Seal of Approval: FIA Approved, because your safety is non-negotiable.Imagine hitting those corners with the confidence of a pro, strapped in securely, focused on the finish line, not on your seatbelt. That's what the Sparco 4 Point Racing Harness brings to the table—or should we say, to the driver's seat.Grab your Sparco 4 Point Racing Harness now and transform every drive into a track-worthy triumph! Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. The 4-point harness features 2-inch lap and 3-inch shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only. TECHNOLOGY 2" lap and 3" shoulder straps Pull-Up lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved

Sparco Six-Point Enduro Racing Harness 2" HANS SHOULDER BELTS W/ STEEL ADJUSTERS Want a Sparco harness to match your new Sparco seat?  This is the one to buy.  Sparco’s full line of harnesses works in unity with Sparco's competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. This six-point HANS-compatible harness features two-inch lap belts, with two-inch shoulder straps Each strap attaches in the center using aircraft-quality quick-release buckles, with integrated anti-submarine belts. The steel adjusters allow for smooth, quick adjustments and perfect clamping. Shoulder and sub belts attach to your car or seat mounts using snap-on fittings, with carabiner fasteners for lap belts. This harness is FIA approved. TECHNOLOGY 2" Lap and Shoulder belts Light-weight carabiner fasteners for lap belts Pull-down lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in mounting kit included FIA Approved Available in black, blue, or red.

Sparco 6 Point Racing Harness (3" Steel) Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Our 6-point harness features 3-inch lap and shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only. TECHNOLOGY 3" lap and shoulder straps Pull-Up lap belts Light-weight steel adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved

Sparco 6 Point Racing Harness 2"/3" HANS SHOULDER BELTS W/ ALUMINUM ADJUSTERS Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Sparco's 6-point HANS-compatible harness features 3-inch lap straps and shoulder straps that taper from 3 inches to 2 inches. This tapered design allows for the integration of a HANS device. Each strap attaches in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight aluminum adjusters allow for smooth, quick adjustments and perfect clamping. Shoulder and sub belts attach to your car or seat mounts using snap-on fixings and caribiner fasteners for lap belts. This harness is FIA approved. TECHNOLOGY 3" lap belt 3" tapered to 2" shoulder straps Light-weight carabiner fasteners for lap belts Pull-Up lap belts Light-weight aluminum adjuster for smooth and quick tensioning Snap-in Kit Mounting included FIA Approved Available in black, blue, or red.

Sparco Racing Seats ADV Elite Carbon The Sparco ADV Elite is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the ADV Elite has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the ADV Elite was specially designed with an upright driving position preferred by rally drivers. In addition to the Sparco ADV Elite's rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the ADV Elite can withstand over 6,600 lbs. of lateral force. The ADV Elite has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. Sparco ADV Elite Carbon Racing Seat Details: Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric Racing Seat Dimensions:

Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating, FIA 8862-2009. This means the Sparco ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the ADV XT can withstand over 6,600 lbs. of lateral force. The ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. The Sparco ADV XT is FIA approved when installed with Sparco 004902 side-mount brackets. Sparco ADV XT Carbon Racing Seat Details: Ultra-light weight carbon fiber construction FIA 8862-2009 approved Tested to an impact of 70G Designed for GT cockpits with more relaxed driver position HANS device compatible Fire retardant fabric Special non-slip fabric Racing Seat Dimensions:

Sparco Air Pro RF-5W 1977 Auto Racing Helmet The Air Pro RF-5W 1977 is a painted version of the Sparco Air Pro RF-5W. This retro inspired helmet has a white base with blue or red stripes beneath a durable clear coat finish. The Sparco Air Pro RF-5W 1977 features a Carbon-Kevlar and fiberglass construction with a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase air circulation throughout a redesigned interior. This interior has channels that cool the driver, plus additional channels routing air towards the visor to reduce the chance of visor fogging. The Sparco Air Pro RF-5W 1977 has removable, washable padding that can be repositioned for a comfortably personalized fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Air Pro RF-5W 1977 has been designed to accommodate a drink tube and an intercom system (both sold separately). Available in white with blue or red stripes, the Sparco Air Pro RF-5W 1977 has HANS posts pre-installed. Snell SA2020 and FIA 8859-2015 approved. Sparco Racing Helmets History of Innovation and Excellence Today's Sparco auto racing helmet line is the result of over 40 years of research and development experience, including wind tunnel testing. The new range was designed to meet the requirements of both Snell SA2020 and FIA 8859-2015 ratings. To meet these requirements Sparco introduced new innovations for driver safety and comfort. All auto racing shells now have layers of Carbon-Kevlar for greater strength. Sparco helmets have been wind-tunnel tested to maximize exterior vent placement and air flow. The EPS interiors and padding have also been redesigned for increased air flow and driver comfort. Sparco also introduced a new size: Medium/Large. This M/L size takes advantage of using the smaller helmet shell which is lighter and more compact. Sparco Air Pro RF-5W 1977 Auto Racing Helmet Sizing XS (54cm) Small (55-56cm) Medium (57-58cm) Medium/Large (59cm) Large (60cm) XL (61cm) XXL (62cm) Sparco Air Pro RF-5W 1977 Auto Racing Helmet Features Painted retro design Lightweight carbon-kevlar/fiberglass construction New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate accessories like drink tubes and an intercom system (accessories sold separately) Snell SA2020 and FIA 8859-2015 approved Additional Sparco RF-5W Pro helmet shields available here. Don't forget to check out the CMS Performance Racing Helmet Bag, the perfect way to keep your new Sparco Air Pro RF-5W 1977 auto racing helmet safe and secure throughout each race weekend. Proper Helmet Fitment The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Air Pro RF-5W SPARCO AIR RO RF-5W AUTO RACING HELEMT SNELL SA2020 The Sparco helmet line is a result of over 40 years of research and development experience, including wind tunnel testing. The new SPARCO AIR PRO RF-5W range was designed to meet the requirements of the new Snell SA2020 and FIA 8859 ratings. The 2020 type-approval introduces new impact requirements, the helmets need to dissipate large amounts of energy in different ways. To meet these requirements Sparco is introducing new innovations for driver safety and comfort. All shells now have layers of carbon-Kevlar for greater strength. The helmets have also been wind-tunnel tested to maximize exterior vent placement and flow. The EPS interiors and padding have also been redesigned for increased airflow and driver comfort. Sparco also introduces a new size: Medium/Large. This M/L size takes advantage of using the smaller shell which is lighter and more compact.  ADDITIONAL HELMET SHIELDS FOR SPARCO AIR PRO RF-5W AVAILABLE HERE Also, don't forget to check out the CMS Performance Racing Helmet Bag to keep your new Sparco Air Pro RF-5W helmet safe and secure throughout each race weekend. SPARCO AIR PRO RF-5W AUTO RACING HELMET TECHNOLOGY Lightweight carbon-kevlar/fiberglass construction New Medium/Large size uses lighter, more compact shell Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system (sold separately) Snell SA2020 and FIA 8859-2015 approved SPARCO AIR PRO RF-5W AUTO RACING HELMET SIZES: XS (54CM)  - XXL (62CM) SPARCO AIR PRO RF-5W AUTO RACING HELMET COLORS: GLOSS WHITE AND MATTE BLACK The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Arm Restraints Most racing organizations require arm restraint systems for open-wheel or open-cockpit competition. These Sparco Arm Restraints come in three colors and have padded arm bands for additional comfort. Sparco Arm Restraint Features: Great for open-wheel cars Padded arm bands and steel hardware D-ring system allows you to adjust the arm band circumference for a comfortable fit Easy release allows quick entry and exit from driver's compartment Available in black, red or blue Meets SFI 3.3 standards

Sparco Arrow Nomex Gloves The Sparco Arrow racing glove provides incredible grip and superior comfort. The palm is printed with high-grip HTX, a Sparco patented material that increases grip, comfort and dexterity. HTX is strategically placed for maximum steering feel and performance. Another Sparco-exclusive feature is Touch-S technology, a Touch Sensitive index finger and thumb. Sparco's patented fire resistant touch sensitive material allows you to use your touch screen data acquisition electronics or phone lap timer apps without taking off your gloves. The Arrow is ultra-lightweight with pre-curved fingers, external stitching and a unique inner thumb seam that gives unparalleled comfort on long stints. Available in Black/White, Black/Red, Navy, White, and Red. The Sparco Arrow is both FIA and SFI approved. TECHNOLOGY Touch Sensitive finger tips compatible with touch screen data acquisition and lap timer apps Anatomically correct seamless palm that contours to the natural shape of the hand Printed high-grip HTX palm, a Sparco-exclusive material that increases grip, comfort and dexterity External seams and unique inner thumb seam for extreme comfort FIA and SFI approved

Sparco Arrow-K Kart Racing Glove The Arrow-K is a boldly styled karting glove that provides incredible grip and superior comfort. Featuring an anatomically correct seamless palm that contours to the natural shape of the hand, the palm of the Arrow-K glove uses an Ultra Grip silicon palm that increases grip, comfort and dexterity. The Arrow-K has exclusive touch sensitive index finger and thumb for use with touch screen electronic devices such as data logging. The Arrow-K is  an ultra-lightweight glove made with wear-resistant polyamide fabric with external seams for comfort. TECHNOLOGY Anatomically correct seamless palm that contours to the natural shape of the hand Touch Sensitive index and thumb for touch screen devices External seams and high contrast palm and finger grips with premium silver accents