Auto Racing Helmet Accessories

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air 90 Degree Maglock Kit  The exclusive Stilo "Top Air System" for ST5 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the innovative 90 degree system you can now make quick air connection with your Stilo ST5. Does not come with a flow adjuster. Air enters in through four small ventilation holes molded into the top of every ST5 helmet. Air fed into the Top Air is directed to the top of the head .  Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air 90 Degree Maglock System can be fitted to all Stilo ST5 model helmets.       

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Maglock Kit  The exclusive Stilo "Top Air System" for ST5 helmets takes fresh air to the driver's head and is fitted with an outlet designed to work with a Maglock system. With the new innovative Top Air outlet you can now make quick air connection with your Stilo ST5. Does not come with a flow adjuster. Air enters in through four small ventilation holes molded into the top of every ST5 helmet. Air fed into the Top Air is directed to the top of the head .  Old air flows out of the side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Short Top Air Maglock System can be fitted to all Stilo ST5 model helmets.       

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Kit For Maglock Systems Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This Top Air is designed to be used with a Maglock System. This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are six small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the center four holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the top side holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 model helmets. It comes in two sizes to best fit your helmet: YA0893-S Non-Adjustable for helmets XS 54cm to L 59cm YA0894-S Non-Adjustable for helmets L+ 60cm to 4XL 64cm      

 Schuberth SP1 Helmet Speaker Kits Integrated Speaker Kits elevate your communication experience to the next level by seamlessly incorporating high end audio components without compromising comfort. Speaker Kits feature helmet speakers built directly into the Noise Reduction Earcups*, and include Boom Style noise canceling microphone. Dual Electronic Kits also include an earbud connector, for use in conjunction with Earcup Speakers. Drivers that purchase a Speaker Kit will receive built-in electronics instead of the standard Noise Reduction Earcups and soft Comfort Cushions.AVAILABLE SPEAKER KITS: SH HK1111: Noise Reduction Earcups with speakers with Boom Style mic and IMSA connection SH HK1151: DUAL KIT: - Noise Reduction Earcups with speakers and earbuds with Boom Style mic and IMSA connection  SH HK1121: 3.5MM Earbud with Boom Style mic and IMSA connection PLEASE NOTE: We will not warranty any Schuberth communications kit that has not been professionally installed by our team of experts.  

Trac-Com Semi Custom Earbuds with 1/8in Plug Upgrade your racing communication with the Trac-Com Semi Custom Earbuds. These professional style earbuds are designed for perfect communication while on the track. The semi-custom earpieces are specifically made for drivers, ensuring a comfortable and secure fit. Featuring a standard 1/8in plug, these earbuds are compatible with most racing communication systems. The high-quality audio ensures clear and crisp communication, allowing you to stay focused on the race. Don't settle for generic earbuds that may fall out or cause discomfort during a race. Invest in the Trac-Com Semi Custom Earbuds for a personalized and professional racing experience.

Bell Racing Helmets SE077 3mm Mirrored Helmet Shield Bell SE077 helmet shields are specifically designed for the Bell HP77 helmet. The SE077 is a 3mm, injection-molded, optically correct polycarbonate face shield with a Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE077 shield uses the Bell SV (SE07, SE077) pivot kit. It is compatible with tear offs and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) Bell SE077 Helmet Shield Tint Options: Silver Mirror Gold Mirror Blue Mirror Red Mirror Rainbow Iridium Mirror

Stand21 Porsche Motorsport Helmet & HNR Bag Officially-Licensed Porsche Motorsport helmet and head and neck restraint carry bag. Constructed from durable tear- and puncture-resistant polyester, this premium Porsche Motorsport logo bag safely carries one helmet plus one or two head-and-neck restraints (depending on the size/model). Lined in soft material with reinforced seams for durability, there's no better way for the Porsche racing enthusiast to tote helmet and HANS. 

Simpson Equipment Sterilizer and Dryer The Best Way to Keep Your Helmet Gloves and Shoes Fresh and Dry Simpson’s newest antibacterial multi-equipment dryer circulates air in a temperature controlled environment to safely dry helmets, gloves, and footwear. It’s hard to put that wet smelly helmet back on your head. What’s happening to your expensive equipment? The truth is cheek pads and liners degrade over time from perspiration and bacteria. Keep your equipment in peak condition longer by stopping mold and mildew before it starts. You can focus on your driving or riding and quickly refresh between events. Simpson Equipment Sterilizer and Dryer Features: Disinfects & sanitizes Anti-bacterial to eliminate odors and control bacteria growth Temperature and timer settings Simple design easily accommodates multiple styles and sizes of equipment1 Dual dryer ports 110 volt operation A Note Regarding Ozone Ozone is widely used for sterilization. The Simpson Equipment Sterilizer and Dryer generates ozone using the corona discharge method. It is a pale blue gas with a distinctively pungent smell, detectable by many people at concentrations as low as 0.01 ppm in air. Ozone is formed naturally from diatomic oxygen by electric discharge or exposure to ultraviolet radiation. Ozone is a powerful oxidant and has many industrial and consumer applications related to oxidation. It's used to deodorize air, purify water, disinfect kitchen tools and treat industrial waste. This same oxidizing property, however, can cause ozone to damage mucous and respiratory tissues. Therefore, for safety and comfort purposes, we recommend using the Simpson Equipment Sterilizer and Dryer only in a space with adequate ventilation. We also recommend staying away from it while it is disinfecting gear with ozone. 1 Helmet, gloves, and shoes pictured are not included. They are shown for illustrative purposes only.

Stilo Helmet Skirt Stilo 2 layer nomex fitted helmet skirt. Fire retardant fitted helmet skirt can be used to help prevent dust and debris from coming inside the helmet. Its design keeps the skirt tight to the helmet without the use of Velcro and helps eliminate dust, smoke or flames from entering the helmet. Fits any ST5 full face helmet. SFI 3.3 approved! Features a cutout for Eject Helmet Removal tube

Stilo ST5 Helmet Visor FIA8860-2018 ABP Compatible only with Stilo ST5 FIA 8860-2018 ABP helmets. Stilo offers a wide variety of visor color and tint options, covering all racing conditions, for the Stilo ST5 FIA 8860-2018 ABP helmets. These visors all have an anti-fog and anti-scratch coating1, and are made to fit your Stilo ST5 ABP helmet perfectly. Since 2019, the most stringent FIA 8860-2018-ABP (Advanced Ballistic Protection) helmet standard has been in effect for Formula 1. This latest standard builds frontal penetration protection into the helmet shell. The new FIA standard drove Stilo engineers to design and develop the Stilo ST5 FIA8860-2018ABP, along with this new shield design. While looking very similar to the standard Stilo ST5 visor, there is a slight shape difference. (The Zylon strip used prior to the FIA 8860-2019 ABP standard is available for use on other Stilo ST5 helmets. It must be purchased with a new ST5 visor and built by Stilo. It can not be installed by the end user.) Stilo ST5 Visor FIA8860-2018 ABP Details: Manufacturer: Stilo Qty in kit: one (1) visor Visor stocking bag included: Yes Fits Stilo ST5 FIA8860-2018 ABP helmets: Yes Fits any other Stilo helmet: No ABP is an Acronym for Advanced Ballistic Protection in the latest FIA F1 standard Stilo ST5 Visor FIA8860-2018ABP Part Number List: YA0800ABP Clear YA0801ABP Smoked Medium  YA0802ABP Smoked Dark  YA0803ABP Silver Mirror Medium YA0804ABP Silver Mirror Dark  YA0805ABP Iridium Blue Medium  YA0806ABP Iridium Blue Dark  YA0807ABP Iridium Red Medium  YA0808ABP Iridium Red Dark 1 Anti-fog/anti-scratch visors require special care. Only use Stilo Visor Cleaner (Acrysol). Do not use Windex or other glass cleaner containing ammonia as this can harm the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside.

Stilo Short Sun Visor For ST5 & ST5.1 Helmets This short sun visor for Stilo helmets fits all models of Stilo ST5 helmet, including the latest SA2020 ST5.1 helmets. This visor cannot be used in conjunction with a standard Stilo shield and instead will replace the standard shield. Stilo ST5.1 GT Composite helmet (shown) is sold separately.

Stilo Visor for the ST5 and ST5.1 Racing Helmet Colorful Anti-Fog/Anti-Scratch Visor Shields for Your Stilo Helmet These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of visor options including many popular iridium colors. All Stilo visors have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST5 or ST5.1 helmet (both the GT and N "naked" versions)1. A Note on Cleaning Anti-Fog/Anti-Scratch Visors Anti-fog visors require special care, only use Stilo Visor Cleaner (Acrysol). Do not use Windex or glass cleaner containing ammonia as this can harm the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside. 1 Stilo helmet not included.

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air Kit Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car’s fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 model helmets. It comes in two sizes to best fit your helmet: YA0834 Non-Adjustable for helmets XS 54cm to L 59cm YA0857 Non-Adjustable for helmets L+ 60cm to 4XL 64cm

Stilo Helmet Owner's Kit by Competition Motorsport The Perfect Accessories For Your Stilo Helmet This kit has everything you need to get the most out of your Stilo helmet, including a Stilo Helmet Bag to keep your helmet and HANS device1 safe and secure plus the proper care products to ensure your helmet is clean, stays fresh, and lasts for years. What Makes Up the Stilo Helmet Owner's Kit Stilo Helmet & HANS Bag fits your Stilo helmet plus all major brands of head-and-neck restraints (will not fit Simpson Hybrid devices) Acrysol shield cleaner, the only cleaner recommended by Stilo for use with their helmet shields Molecule Refresh 16 oz. spray gets the funk out and keeps your helmet looking & smelling like new OPTIONAL: Stilo to IMSA, NASCAR, Trac-Com, Garmin, Raceceiver, or Chatterbox 3.5mm adapter cable 1 Helmet and HANS device are not included.