C3 Carbon
C3 Carbon Ferrari F12 Carbon Fiber Side Skirt Covers
$549.99
C3 Carbon Ferrari F12 Carbon Fiber Side Skirt Covers
Add a flash of drama to your F12 with autoclaved, pre-impregnated (pre-preg) dry carbon fiber side skirt covers from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon side skirt covers install easily and dramatically upgrade the look of your F12 Berlinetta!
FITS: Ferrari F12 Berlinetta
FEATURES:
Autoclaved pre-preg 100% dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs easily without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Front Trunk Package
$1,999.99
C3 Carbon Ferrari 458 Carbon Fiber Front Trunk
C3's exacting quality, precise fitment, and a premium hand-polished finish come at a far more reasonable price than the factory Ferrari pieces. Precision-formed in an autoclave from the finest aerospace-grade pre-impregnated dry carbon fiber, each C3 piece matches the 1x1, 3K plain weave of OEM Ferrari carbon perfectly. Fit-and-finish are, of course, impeccable for a truly factory appearance.
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1, 3K plain weave matched to OEM Ferrari
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Each piece installs in minutes without any modifications
KIT INCLUDES:
Four pre-preg dry carbon trim panels
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Porsche 991.2 GT2 RS Wing End Plates
$1,649.99
C3 Carbon Porsche GT2 RS Wing End Plates
FITS:Â 991.2 Porsche GT2 RS
C3 Carbon GT2 RS 100% carbon fiber rear-wing end plates offer the uncompromising look, fitment, and finish to match the GT2 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts.
The look and finish are simply glorious. These really are the pieces Porsche should have put on the GT2 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in high-gloss or matte/satin clear automotive urethane top coat, or satin black top coat.
FEATURES:
Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing
Available in gloss or matte/satin clear, or satin black top coat
OEM-perfect fit
Installs in minutes without any modification using original hardware
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Installation Instructions Here
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Bay
$2,749.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Bay
Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 GTB!
Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces. Bring your 488 GTB engine room up to standard with C3 Carbon!
C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a very popular upgrade for our 488 GTB customers.
FITS: 2016+ Ferrari F488 GTB Coupe (not Spider)
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Side Skirts
$2,749.99
C3 Carbon Ferrari 458 Carbon Fiber Side Skirts
Made from aerospace-grade autoclaved dry carbon fiber and matched to the Ferrari factory's signature 1x1 3K plain weave pattern, these side skirts are a perfect match to the stunning carbon fiber on the 458. Ferrari can add them to your 458 build at the factory...for $9,000!
You can easily install them yourself using only hand tools for a fraction of the factory cost, without sacrificing even the smallest bit of fitment, finish, or quality. Unlike many other brands, these are not carbon overlaid on fiberglass. C3 uses only 100% hand-laid pre-preg dry carbon fiber, formed in the autoclave at high pressure and temperature using billet aluminum molds.
These Ferrari carbon fiber side skirts were originally developed using highly innovative fluid dynamics techniques and perfected in the wind tunnel in order to optimize the 458's aerodynamics. The lateral plane on each skirt plays a crucial role in reducing high-speed lift by minimizing air flowing from the side of the car into the underside. C3 Carbon's carbon fiber combines cosmetic appeal with outstanding technical performance, reducing the total weight of the car in the process.
FEATURES:
Autoclaved pre-preg dry carbon fiber construction with 1x1 3K plain weave matching factory Ferrari carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Cover
$1,424.99
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Cover FREE SHIPPING! Beautiful carbon fiber replacement for the black plastic engine cover on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine cover installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece is the perfect upgrade to the Huracan engine room. Fitment: 2014+ Lamborghini Huracan FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products: Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Engine Trim
$1,649.99
C3 Carbon Ferrari 458 Carbon Fiber Engine Trim
FITS:Â Ferrari F458 Italia
Ferrari displays the incredible F458 engine under a glass bonnet, which is the perfect opportunity to surround it with beautiful C3 carbon fiber instead of the factory's dull black plastic. A $7,888 option offered by Ferrari, the C3 Carbon Fiber Engine Cover offers exacting quality, precise fit, and a premium finish at a much more reasonable price. Made from the finest aerospace-grade pre-impregnated (pre-preg) dry autoclaved carbon fiber, C3 matches the 1x1 3K plain weave of factory Ferrari carbon pieces perfectly. Fit and finish are impeccable for a truly factory look.
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to factory Ferrari carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modifications
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit!
KIT INCLUDES:
Two carbon fiber engine bay side panels
One carbon fiber engine bay firewall panel
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel
$799.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Firewall Panel
FITS:Â 2016+ Ferrari F488 GTB Coupe only
Stunning carbon fiber panel to add a bit of flair to your 488 GTB engine bay. This piece installs against the firewall under the glass backlight, replacing the stock flat-black plastic trim. C3 Carbon uses ultra-precise CNC-machined billet moulds to create this incredible pre-preg dry carbon fiber replacement with quality, fit, and finish equaling expensive factory Ferrari carbon pieces.
C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship at a reasonable price. Installation is simple. This piece can be paired with C3 Carbon engine surrounds in the Engine Bay Carbon Kit for a stunning upgrade of your car's engine bay.
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds
$2,749.99
C3 Carbon Ferrari 488 GTB Carbon Fiber Engine Surrounds
Stunning carbon fiber engine cover panels are an excellent upgrade for your 488 GTB!
Ferrari displays the gorgeous 488 GTB V8 engine under a glass bonnet, but the stock flat-black plastic engine covers are a significant let down. C3 Carbon uses ultra-precise CNC-machined billet moulds to create incredible pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish equaling the incredibly expensive factory Ferrari carbon pieces!
C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original appearance and craftsmanship, but at a reasonable price. Straightforward installation makes this a favorite our 488 GTB customers.
For the complete carbon treatment for your whole 488 GTB engine room, see our Complete 488 Engine Kit.
FITS: 2016+ Ferrari F488 GTB Coupe (for Spider, click here).
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Trim
$1,099.99
C3 Carbon Ferrari 488 Spider Carbon Fiber Engine Bay
Stunning carbon fiber engine bay trim panels are a spectacular upgrade for your 488 Spider!
Ferrari displays the 488 Spider's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic engine trim is a significant let down. C3 Carbon uses an autoclave to mould pre-impregnated (pre-preg) dry carbon fiber replacements with quality, fit, and finish that rival the factory carbon upgrade (for which Ferrari charges a fortune), bringing the 488 Spider engine room up to standard!
C3 matches the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Straightforward installation makes this a very popular upgrade for our 488 Spider customers.
FITS: 2016+ Ferrari F488 Spider
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Rear Vent Panels
$2,499.99
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Rear Vent Panels
Beautiful carbon fiber replacement for the black plastic trim panels surrounding the Lamborghini Huracan LP610's rear engine hatch. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panels install simply with no modification, bringing you the most accurate, beautiful fit and finish available anywhere.
C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of these carbon fiber piece adds so much flair to the engine cover of Lambo's one-of-a-kind Huracán.
Fitment: 2014+ Lamborghini Huracán
FEATURES:
Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Install easily without any modifications
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Bay Panels
$2,199.99
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Bay Panels
Incredible carbon fiber replacements for the black plastic engine bay surrounds on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine bay trim installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price.
C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. Spectacular appearance and quality make these carbon fiber panels the perfect upgrade to the Huracan's engine room.
Fitment: 2014+ Lamborghini Huracan
FEATURES:
Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Install easily without any modifications
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Engine Oil-Latch Cover
$999.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Engine Oil/Latch Cover
Stunning carbon fiber engine accessory cover sits front and center in your 488 engine bay.
Ferrari displays the 488's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic oil fill/latch cover (front-and-center under the bonnet) is a significant let down. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber replacement fits and functions as perfectly as the factory piece (for which Ferrari charges a fortune) and brings the 488 engine bay up to standard.
C3 matched the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Easy installation makes this a must-have for any 488 owner.
FITS: 2016+ Ferrari F488 GTB and Spider
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Door Sills
$549.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Door Sills
Gorgeous carbon fiber door sill plates for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber Sill Plates install easily and fit perfectly, bringing you the beauty of carbon fiber every time you step into your 488. C3 matches the OEM Ferrari 1x1 3K plain weave for an original Ferrari factory appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner.
FITS: 2016+ Ferrari 488 models
FEATURES:
Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Bonnet Latch Cover
$299.99
C3 Carbon Ferrari 458 Carbon Fiber Bonnet Latch Cover
The factory trim piece that covers the Ferrari 458's bonnet latch (in the engine bay) is made of unattractive black plastic. This oversight detracts from the appearance of the engine bay (more so when it is surrounded by C3 Carbon Fiber Engine Covers). That's easily rectified with C3 Carbon Fiber Latch Cover.
Made from aerospace-grade autoclaved dry carbon fiber, matched to Ferrari's traditional 1x1 3K plain weave pattern, it's a perfect match to Ferrari factory carbon or the C3 Carbon Fiber Engine Cover pieces. And it installs easily in minutes.
FEATURES:
Autoclaved pre-preg dry carbon fiber construction with 1x1 3k plain weave matching OEM Ferrari carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
